Jielv HFMB Series High Flow PP Melt Blown filter cartridge is made from fine PP Melt blown filter media. It is fusing and intertwined with pp resin. The cartridge with 3 layers of filtration and a 3D micron pore, ensures high efficiency of depth filtration. Large diameter extends to a very high flow rate, low investment, and less manpower in many applications.
• 3-layer structure, High flow rate, High efficiency
This type of melt-blown filter cartridge with a 3-layer filtration structure, high dirt holding capacity, and long service life.
• Wide chemical compatibility
100% polypropylene components provide wide chemical compatibility, suitable for use in varied fluids.
• Advance production engineer and fine filter media
The production of this type of melt-blown filter cartridge is a thermal bond without using any binders and adhesives, which will not cause pollution to water.
• Food & beverage;
• Pharmaceutics;
• Chemical;
• Plating
• Microelectronics;
• RO Security filtration;
| OD: | 152,155 mm |
| I.D.: | 112, 115mm |
| Length: | 9.75", 10", 20",30",40" |
| Media: | PP |
| Support: | PP |
| Cage/ core/End cap: | PP |
| Max.Operating temperature: | 65°C |
| Max.Operating Pressure: | 2.0 bar@21°C |
| Removal Rating | End Cap Type | Length | Core | |
| HFMB | 1=1μm | A=OD152mm | 975=9.75" | P=PP |
| 3=3μm | 10=10" | Bland=without | ||
| 5=5μm | B=OD155mm | 20=20" | ||
| 10= 10μm | 30=30" | |||
| 25= 25μm | 40=40" | |||
| 50= 50μm | 60=60" | |||
| 75= 75μm | ||||
| 100= 100μm | ||||
| 150= 150μm |
Copyright © Guangzhou Jielv Environment Technology Co., Ltd. All Rights Reserved
|
Sitemap|Powered by
By continuing to use the site you agree to our privacy policy Terms and Conditions.
