High Flow PP pleated filter cartridge (Jielv JHF Series) is made from depth fine PP non-woven fabrics. The filter has a big diameter of 6 inches, single open, without an inner core, inside to outside flow pattern. The general design structure meet requirement for a high flow rate, and long service life. An optimal choice for cost-effectiveness replacement for 3M 740B series, 7000 series.
• Large filtration area, High efficiency & Less labor cost
With depth fine non-woven fabrics and general good design ensures high dirt holding capacity, and deep pleated filtration makes the filter meet high demanding filtration efficiency, and long service life.
• Wide chemical compatibility
100% polypropylene components provide wide chemical compatibility, suitable for use in varied fluids.
• Less general cost, cost-effective.
Easy handing results in less manpower, and the optimal economical design is a more cost-effective choice for many applications.
• Food & beverage;
• Oil & chemical;
• Steel plant water treatment;
• Power plant water treatment;
• Machinery & Equipment;
• Microelectronics;
• Sea water desalination;
| OD: | 152mm |
| Length: | 20", 40", 60" |
| Media: | PP |
| Support: | PP |
| Cage/ core/End cap: | PP |
| Sealing: | Silicone, EPDM, Viton,E-FKM |
| Max.Operating temperature: | 82°C |
| Max.Operating Pressure: | 3 bar@21°C |
| Removal Rating | Apperance | Length | Seal Material | Core | |
| JHF | 0.5=0.5μm | B=Belt | 20=20" | S=Silicone | Blank=no core |
| 1=1μm | 40=40" | E = EPDM | P=PP | ||
| 3=3μm | C=Cage | 60=60" | V = Viton | ||
| 5=5μm | F= E-FKM | ||||
| 10= 10μm | |||||
| 20=20μm | |||||
| 40= 40μm | |||||
| 70= 70μm | |||||
| 100= 100μm |
Copyright © Guangzhou Jielv Environment Technology Co., Ltd. All Rights Reserved
|
Sitemap|Powered by
By continuing to use the site you agree to our privacy policy Terms and Conditions.
