Product Category

Air Filter Series
Liquid Filter Series
Applications
- Air Filtration
  
  Commercial & Public Buildings
  
  Life Science
  
  Electronics & Optics
  
  Food & Beverage
  
  Transportation
  
  Material Processing
  
  Agriculture
- Liquid Filtration
  
  Biotech & Medical
  
  Microelectronics
  
  Food and Beverage
  
  Industrial Manufacturing
  
  Water Treatment
  
  Laboratory

PP Pleated Big Diameter Filter Cartridge- JBD Series

PP Pleated Big Diameter Filter Cartridge- JBD Series

Product Series Introduction

Jielv JBD Series PP pleated Big Diameter filter cartridge with larger filtration area and higher flow rate. It can meet the minimum requirement of a 120L/min flow rate. with wide application in water and chemical liquid filtration in microelectronics.

Features

• Cost and replacement labor-saving
The filter cartridge with features of a large filtration area, high flow rate, and dirt holding capability, which extend the lifetime of a filter cartridge, and reduce the time of replacing the filter cartridge and down-time. It reduces the general system cost.

• Varied filter media for option
PP/PES/PTFE filter media are available for option based on different actual application requirements. Micron rating is from 0.01um.

• Safe and high reliable filter material
All parts of the JBD series use high purity filter materials and the complete production process without using any glue or active agent, which ensures safety in filtration applications.

Applications

• Water treatment in microelectronics

• Chemical filtration in microelectronics

• Any other application field which requires the same features

Specification

OD:	83-131mm
Length:	5"
Media:	PP,PES, Hydrophobic or Hydrophilic PTFE
Support: pp	pp
Cage/Core/End cap:	pp
Sealing:	EPDM, NBR, Viton etc.
Max.Operating temperature:	80°C
Max.Operating Pressure:	4bar @ 21°C ; 2.4bar @ 80°C

Ordering Code

	Media	Filter Media				End Cap Type	Length	Seal material
	Media	PP	PES	Hydrophobic PTFE	Hydrophilic PTFE	End Cap Type	Length	Seal material
JBD	P = PP	0.22 = 0.22μm	0.04 = 0.04μm	0.01 = 0.01μm	0.05 = 0.05μm	A = 222/Flat	10=10"	E = EPDM
	E= PES	0.45 = 0.45μm	0.1 = 0.1μm	0.02 = 0.02μm	0.1 = 0.1μm	B = 226/Flat	20=20"	V = Viton
	S = Hydrophobic PTFE	1 = 1μm	0.22 = 0.22μm	0.05 = 0.05μm	0.22 = 0.22μm
	S = Hydrophobic PTFE	3 = 3μm	0.45 = 0.45μm	0.1 = 0.1μm	0.45 = 0.45μm
	Q = Hydrophilic PTFE	5 = 5μm	0.65 = 0.65μm	0.22 = 0.22μm	1 = 1μm
	Q = Hydrophilic PTFE	10 = 10μm	1.2 = 1.2μm	0.45 = 0.45μm
		20 = 20μm		1 = 1μm
		30 = 30μm		5 = 5μm
		40 = 40μm		10 = 10μm
		50 = 50μm
		70 = 70μm