Jielv HFEM Series High Flow PP pleated filter cartridge is made from depth fine PP non-woven fabrics. The filter has big diameter of 6.5inch/165mm. There is a core inside which suitable for outside to inside flow filtration. A big diameter & pleated design makes the filter has a big filtration area. A practical design structure ensures long service life and a high flow rate ensures low investment and less manpower in many applications. The economical design makes the filter cartridge more cost-effective.
• Optimal economical design
The economical design makes the filter more cost advantage to help users reduce costs, while at the same time reaching high filtration efficiency.
• 100% PP components
100% polypropylene components provide wide chemical compatibility, suitable for use in varied fluids.
• High dirt holding capacity, long service life
With depth fine non-woven fabrics and scientific design, the filter has a good structure for high dirt holding capacity, which reaches to long service life.
• Food & beverage;
• Oil & chemical;
• Steel plant water treatment;
• Power plant water treatment;
• Machinery & Equipment;
• Microelectronics;
• Sea water desalination;
| OD: | 165mm |
| Length: | 20",40" ,60" |
| Media: | PP |
| Support: | PP |
| Cage/ core/End cap: | PP |
| Sealing: | Silicone, EPDM, FKM,E-FKM |
| Max.Operating temperature: | 80°C |
| Max.Operating Pressure: | 3bar @ 21°C |
| Removal Rating | End Cap Type | Length | Seal material | Core | |
| HFEM | 0.5= 0.5μm | A=In-line handle & big outlet | 20=20" | S=Silicone | P=PP |
| 1=1μm | 40=40" | E = EPDM | |||
| 3=3μm | B=Cross handle & small outlet | 60=60" | N=NBR | ||
| 5=5μm | V = Viton | ||||
| 10= 10μm | F=E-FKM | ||||
| 20= 20μm | |||||
| 40= 40μm | |||||
| 70= 70μm | |||||
| 100= 100μm |
Copyright © Guangzhou Jielv Environment Technology Co., Ltd. All Rights Reserved
|
Sitemap|Powered by
