Jielv HFDP Series High Flow PP pleated filter cartridge is made from depth fine PP non-woven fabrics and were made for the replacement for Pall Ultipleate high flow cartridge. The filter has a big diameter of 6.5inch/165mm, with an outer hard cage, and a single open end when the other end is sealed by an O-ring end cap. coreless design suitable for a flow pattern from inside to outside. The big diameter & pleated design makes the filter has a big filtration area. A practical design structure ensures long service life and a high flow rate ensures low investment and less manpower in many applications.
• Optimal depth filtration design
The optimal depth filtration design makes the filter higher filtration efficiency than the normal type.
• 100% PP components
100% polypropylene components provide wide chemical compatibility, suitable for use in varied fluids.
• Higher dirt holding capacity, longer service life
With depth fine non-woven fabrics and scientific design, the filter has a good structure for high dirt holding capacity, which reaches to long service life.
• Food & beverage;
• Oil & chemical;
• Steel plant water treatment;
• Power plant water treatment;
• Machinery & Equipment;
• Sea water desalination;
|Cage/ core/End cap:||PP|
|Sealing:||Silicone, EPDM, FKM,E-FKM|
|Max.Operating Pressure:||3bar @ 21°C|
|Removal Rating||End Cap Type||Length||Seal material||Core|
|HFDP||0.5= 0.5μm||A=In-line handle & big outlet||20=20"||S=Silicone||P=PP|
|1=1μm||40=40"||E = EPDM|
|3=3μm||B=Cross handle & small outlet||60=60"||N=NBR|
|5=5μm||V = Viton|