Jielv JFH Series pleated filter cartridge is composed of multi-layers, graded pore structure with a tighter inner layer and several outer prefilter layers to continuously increase dirt holding capacity. The related unique structure provides excellent flow rates at the low-pressure drop and high output while achieving submicron retentions, high efficiency, and extraordinary dirt holding capacity. The filter media and its support structure are thermally welded to the end caps, making integral filter cartridges of minimum extractable in a wide range of fluids and applications.
• High dirt holding & High filtration efficiency & Long service life
Multi-layers filter media and gradient pore size structure enable the filter cartridge with features of high dirt holding, high filtration efficiency, and long service life.
• 100% Top Quality Grade PP components
100% polypropylene components provide wide chemical compatibility, suitable for use in varied fluids.
• Excellent integrity
Fixed filter matrix with no adhesives and surfactants providing consistent filtration quality.
• High-quality Food-grade
Materials of construction comply with FDA regulations for food and beverage contact uses.
• Food and Beverage;
• RO Pre-filtration;
• Process Water;
• Plating or other fine chemicals;
• Colloid material filtration;
• High viscosity liquids;
• Fermentation liquids;
|Cage/ core/End cap:||PP|
|Sealing:||Silicone, EPDM, NBR, FKM,E-FKM|
|Max.Operating Pressure:||4bar @ 21°C, 2.4bar @ 80°C,|
|Removal Rating||End Cap Connection||Length||Seal material||Core|
|JFH||0.1= 0.1μm||A = DOE||I=226/Spear FIN||5=5"||S=Silicone||P=PP|
|0.22= 0.22μm||B=213/Flat||J=222/Spear FIN||10=10"||E = EPDM||S=Stainless steel|
|1=1μm||D=226/Flat||L=222/FIN/SS||30=30"||V = Viton|
|5=5μm||F=222/Flat||N=226 Spear FIN/SS||F=E-FKM|
|10= 10μm||G=222 Extended/ FIN||O=222 Spear FIN/SS|
|20= 20μm||H=222 Extended/ Flat|