General Description
SCC Series Pleated filter cartridges are designed with a single piece outer cage which increases the intensity of the filter cartridges. They deliver high efficiency and consistent filtration of fluids in a wide range of critical applications and are Constructed out of pleated melt blown filter media that provides removal of particles from 0.1 to 50fjm. The high surface area ensures long service life and low initial pressure drops. All cartridge hardware components are high purity polypropylene materials for use in critical process application. SCC Series cartridges are available in a while range of configurations to fit most commercially available filter housings.
Specifications
Dimensions: Outside diameter: 2.7” (69mm)
Length: 9.75u,10__, 20", 30", 40"
Media
Material of Constructions: Filter media: PP
Support/Drainage: PP Cage/Core/End cap: PP
Seal Material : Silicone, EPDM, NBR, Viton, Teflon, E-FKM
Performance: Removal Rating: 0.1pm, 0.22pm, 0.45pm, 1pm, 3pm, 5pm, 10pm, 20pm, 50pm
Maximum operating temperature: 80°C @1 Bar, support adaptors are recommended for temperature exceeds 50°C
Maximum operating differential pressure: 4.0Bar,normal temperature Maximum operating differential pressure (reverse direction): 2.0Bar normal temperature Sterilization temperature time: 5times, 20 minutes cycles at 120°C
Features and Benefits:
■Excellent chemical compatibility. Suitable for filtering organic solvents,acid bases
■Pleated design increased the filtration area
■low pressure drop, long service life
■Full range of removal ratings
■Graded pore density for high dirt holding capacity
■FDA compliance material
Applications
■Pharmaceutics
■Food and beverage
■Oil & Gas
■Microelectronics
■Chemical industry
■Prefiltration for RO
■Paints & Coatings
■Cosmetics
■Photographic solutions
■Plating solutions
